Compatible with Avid/SRAM MTB & Road bicycle Dot Fluid Braking Systems that utilise both the standard threaded fittings and Bleeding edge Adaptor as well as most Formula & Hayes branded Brakes

Kit contents:

• 2 X 30ml syringes
• 2 X Metal adapters, tubing, tube clamps and syringe locking adapters to ensure an airtight assembly
• 1 x Bleeding Edge Adaptor (suits 2017+ Avid/SRAM Braking systems with the S4 Caliper)
• 1 x Universal bleed block incorporating rotor trueing tool
• 1 or 2 x 100ml Bottles of high-performance DOT 5.1 fluid (enough for 2-3 bleeds) – optional
• 1 x Pair of nitrile (latex free), gloves
• 1 X T10 Torx Tool
• Shop Towel for clean ups (if buying brake fluid)

Dot 5.1 fluid is compatible with all systems that use Dot fluid including Dot 3 and Dot 4. Dot 5.1 has a higher boiling point preventing loss of power on those long downhill runs, better low temperature performance and reduced service intervals.

100ml of fluid provides enough for 2-3 standard bleeds of the front and rear brakes. If you haven’t replaced your fluid for 2 years we recommend completing a complete flush for optimal performance. A complete flush of the front and rear brakes will use around 100ml of fluid. 

This Kit is NOT compatible with DB8 and Maven braking systems which have a different bleeding edge port and utilise Mineral Oil, Not Dot Fluid.  

SRAM Mineral Oil bleed kits are available through our Ebay store along with a range of other bleed kits and brake pads to suit many other models.

Looking for a bleed kit to suit other brands?  We have bleed kits to suit most major and minor brands as well as our Universal fitting Professional kit in our store.